Oxidized Brass There are 328 products.

• 
  Available

  Setting Bezels 25x18mm Bail Attached...

  You will receive three oxidized brass bezel settings for 25x18mm flat back stones. There is a bail soldered to the top so that you can add these to your favorite chain with a minimum of effort. These items were made in the USA. #A605

  $3.80 Add to cart View
• 
  Available

  Simple 15mm Settings with 1 Loop Oxidized...

  You will receive six oxidized brass settings with one loop. They are for flat back stones measuring 15mm. The front and the back are shown. Made in the USA. #W89

  $4.00 Add to cart View
• 
  Available

  Smooth Edge Oxidized Brass Settings 18x13mm

  You will receive six oxidized brass settings for 18x13mm oval stones. These settings have a simple smooth edge, four prongs and a pendant ring.  #L109

  $4.00 Add to cart View
• 
  Available

  Smooth Edge Oxidized Brass Settings...

  You will receive one setting for 25x18mm oval stones. These oxidized brass settings have a simple solid smooth edge, four etched prongs and a pendant loop. #L108

  $3.85 Add to cart View
• 
  Available

  Shallow Settings Oxidized Brass 18x13mm

  You will receive twelve oxidized brass 18x13mm settings for stones with oval or flat backs. These settings have four prongs and one loop. They are only 3mm deep. #R604

  $3.75 Add to cart View
• 
  Out of stock

  Serrated Edge Settings 10x8mm Oxidized...

  You will receive twelve serrated edge settings which measure 10x8mm. They are oxidized brass. Made in the USA.  #A230 I've turned one setting on its side in the photo so that you can see the side detail.

  $2.00 Add to cart View
• 
  Available

  Lace Edge Settings 10x8mm Oxidized Brass (12)

  You will receive twelve lace edge settings which measure 10x8mm. They are oxidized brass. The front and back are shown. Made in the USA. #A240

  $3.95 Add to cart View
• 
  Available

  Cushion Octagon Settings 14x12mm Oxidized...

  You will receive six turtle style settings with four decorative prongs. These settings are oxidized brass and they hold cushion octagon stones which measure 14x12mm #A236

  $4.00 Add to cart View
• 
  Available

  Lace Edge Settings for 7mm Rounds Oxidized...

  You will receive twelve oxidized brass lace edge settings for 7mm flatback stones. Both a front and back view is shown in the photo. Made in the USA. #A241

  $3.00 Add to cart View
• 
  Available

  Ornate Oval Solid Oxidized Brass Settings...

  You will receive six ornate settings with smooth solid backs. They are oxidized brass and the setting area measures 6x4mm. The outside measurement is 13.5mm in length by 11mm in width. These settings are perfect to layer over larger low dome stones. The front and back are shown. Made in the USA. #R613

  On sale! $5.25 Add to cart View
• 
  Available

  Ornate Details Oxidized Brass Settings 7mm...

  You will receive six ornate settings. They are oxidized brass and the setting area measures 7mm. The outside measurement is 14mm in width. These settings are perfect to layer over larger low dome stones. Made in the USA. #R614

  $4.75 Add to cart View
• 
  Available

  Tiny Floral 10x8mm Brass Settings (2)

  You will receive two settings with four prongs, an open back and a pendant loop in oxidized brass. These settings are for 10x8mm oval stones. The outside measurement is 22x16.5mm.  #B506

  $4.00 Add to cart View
• 
  Available

  Starburst Settings for 4mm Stones Oxidized...

  You will receive twelve settings which will hold flat back or pointed back rhinestones which measure about 4mm. These settings are oxidized brass and they measure 12mm across. The front and back are shown. Made in the USA. #B621

  $3.00 Add to cart View
• 
  Available

  Turtle Style Settings 18x13mm Stones...

  You will receive six turtle settings for flat back stones which measure about 18x13mm. These settings are oxidized brass. They are perfect for odd sized stones because you can use a stone which is 3mm larger or smaller with these settings. #A841 Tip: Use a tiny dot of glue to hold your stone centered over the base....

  $4.95 Add to cart View
• 
  Available

  ^Turtle Settings for 25mm Stones Oxidized...

  You will receive three turtle style oxidized brass settings for flat back stones which measure about 25mm. The base from which the prongs extend measures 19mm. They are perfect for odd sized stones because you can use a stone which is larger in them since the prongs can be adjusted. Made in the USA.   #K15

  $2.85 Add to cart View
• 
  Available

  Turtle Style Settings 18mm Stones Oxidized...

  The round base from which the prongs extend measures 16mm. You will receive twelve oxidized brass turtle settings for flat back stones which measure about 20mm. They are perfect for odd sized stones because you can use a stone which is 5mm larger or smaller with them. #A840 A turtle setting pad should be a tiny bit...

  $4.00 Add to cart View
• 
  Available

  Turtle Style Settings for 25x18mm Stones...

  You will receive three pronged settings or turtle settings for flat back stones which measure about 25x18mm. Since the prongs are long and sturdy you can use odd sizes and shapes which are close to 25x18mm also. These settings are oxidized brass. The setting base from which the prongs extend measures 24x19mm. Made...

  $4.00 Add to cart View
• 
  Available

  Turtle Settings Open Back 30mm Oxidized...

  You will receive three settings with prongs and open backs for domed or flat back stones which measure as small as 25mm or as large as 30mm. The prongs are long enough to bend them where you need to. These settings are oxidized brass and the base from which the prongs extend, measures 24mm. Made in the USA. #S69

  $3.00 Add to cart View
• 
  Available

  Turtle Style Settings for 30mm Stones...

  You will receive three oxidized brass turtle settings for flat back stones which measure about 30mm. They are perfect for odd sized stones since you can use a stone which is 5mm larger or smaller with these settings. #A842

  $3.00 Add to cart View
• 
  Available

  Pendant Fancy Setting Drop Style 10x8mm...

  You will receive twelve oxidized brass setting drops which hold flat back stones measuring 10x8mm. The drop itself is 29mm tall. The front and back are shown. Made in the USA. #A114

  $6.25 Add to cart View