No products
Check out
You will receive six raw brass filigree flower pendants. It has two different setting sizes within the design. The larger center setting well measures 7mm. The smaller cup settings along the edge are for 3mm items. (Pearls would be perfect for these cups.) The outside measurement is 26x23mm. #R316r
You will receive six elegant simple raw brass settings with a pendant loop. They are for flat back stones measuring 18mm. #K22r
You will receive twelve raw brass settings for 15mm flat back stones, buttons or typewriter keys. These settings have slightly dapt backs, four prongs and a pendant loop. The prongs are 4mm long. Both the front and back are shown in the images. Made in the USA. #R646
You will receive one sturdy setting for 38mm objects such as antique buttons or flat back cabochons. The prongs could be opened or closed carefully to allow objects a tiny bit larger to fit. This setting is raw brass and the outside measurement including the loop is 52x47mm. #T198R
You will receive two raw brass oval settings with lots of openwork. The outer measurement is 59x36mm. The setting measures 35x17mm. The front and back are shown. Made in the USA. #H166R
You will receive one raw brass with flowers and four loop effects. This is a great setting for items which measure 38x28mm. It can be used horizontally or vertically. The outside measurement is 59x48mm. The front and back is shown. Made in the USA. #H162R
You will receive one oxidized brass setting with four prongs, an open back, and a pendant loop. This setting is for 14x10mm oval stones. The front and back are shown. Made in the USA. M27R
You will receive three raw brass setting connectors with four loops. They hold round stones with a flat back measuring 18mm. The outside measurement from loop to loop is 30mm. The front and back are shown. Made in the USA. #R346R
You will receive twelve serrated edge settings which measure 10x8mm. They are raw brass. I've turned one setting on its side in the photo so that you can see the side detail. The front and back are also shown. Made in the USA. #R345R
You will receive three crown edge settings for 25x18mm oval items. They are raw brass and they were made in the USA. #X424a
You will receive three crown edge settings for 20x15mm oval items. They are raw brass and they were made in the USA. #X424
You will receive twelve crown edge settings for 13mm round items. They are raw brass and they were made in the USA. #X423
You will receive twelve crown edge settings for 11mm round items. They are raw brass and they were made in the USA. #X422A
You will receive one fabulous open back setting for stones which measure 25x18mm. This setting has four prongs, openwork around the border and a pendant loop. It is raw brass. Made in the USA. #X418
A fancy flowing floral design borders this 18x13mm raw brass setting. You will receive one setting with four prongs, an open back and a pendant loop. Open back settings are great for faceted back stones. #X417A
You will receive twelve delightful little flower centerpieces. They are raw brass. The total outside measurement is 18mm and the six small flowers measure 6mm each. The flowers are connected by spokes and they have wells which will hold pointed back stones measuring about 2.5mm. The center would hold an 8mm stone or...
You will receive twelve raw brass three ring connector settings which hold 2.5mm pointed back rhinestones. These settings are 9mm tall including the rings and 6mm wide at the edge of the flower. Made in the USA. #X383A
You will receive twelve closed back settings with one loop and four simple prongs. They are raw brass and they are for pointed/round back stones which measure about 6mm in width and 3mm in depth (29SS). Made in the USA. #X375
You will receive twelve raw brass settings with a loop. They are for gemstone replicas measuring 8mm or stone size 39 (39ss). #X365A
You will receive twelve closed back settings with one loop and four simple prongs. They are raw brass and they are for faceted back stones which measure about 6.5mm in width and 3mm in depth. #X366